New Cromarty Yachts | Sailing Boats | Cutters and Sloops | Schooners, Ketches and Yawls | Motor Sailers | Classic Yachts | Classic Motor Cruisers | Motor Yachts | Project Boats | Sell your Boat

"Boojum", 46ft LOD Gaff Cutter  Lying  Scotland

 
Home
Sails and Deck Gear
Cockpit
Layout
Saloon
Galley
Forecabin
Mid Cabin
Heads
Specifications
Comments

  Site visits

Click here to tell

39,950  Sold - More craft like this required!
For current listings click on HTTP://www.EasternYachts.com

Boojum is a 46 ft gaff cutter built by W.E. Thomas in 1909. She has undergone a major restoration program. The hull is constructed of Pitch Pine planking on oak frames epoxy sheathed; the deck is two layers of 3/4 inch ply overlain  with 7/8inch pitch pine planking bedded in epoxy and seamed with Sikaflex. Bulwarks and doghouse are Teak.  

Boojum offers up to seven berths in three cabins

Mechanical propulsion is by BMC 3.4l 70hp 4-cylinder diesel engine

Approximate Dimensions

Length Overall  58ft 17.68m
Length on Deck  46ft 14.02m
Waterline Length  39ft 11.89m
Beam  11ft 3.35m
Draft  7ft 2.13m
Displacement  16.53 tons 16,800kg

Her Bronze keel bolts were last inspected OK in 2004 and her galvanised rigging was renewed in 2002.

 

 

[ Home ] Sails and Deck Gear ] Cockpit ] Layout ] Saloon ] Galley ] Forecabin ] Mid Cabin ] Heads ] Specifications ] Comments ]
For further details or to arrange to view, please contact Adrian  Espin at: - Astonbury Marine Services 
19 Colne Road, Brightlingsea, Essex, CO7 0DL  Tel: 01206 305 996  or +44 1206 305 996
  
or email to: adrian@EasternYachts.com
In this case we are acting as Brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted.