New Cromarty Yachts | Sailing Boats | Cutters and Sloops | Schooners, Ketches and Yawls | Motor Sailers | Classic Yachts | Classic Motor Cruisers | Motor Yachts | Project Boats | Sell your Boat

"Cayenne" 43ft Robert Clark classic cutter, lying Suffolk

 
Home
Sails and Deck Gear
Cockpit
Layout
Saloon
Galley
Nav Station
Forecabin
Heads
Engine
Specifications
Comments

  Site visits 

Click here to tell

37,000   Under Offer - More craft like this required!
For current listings click on HTTP://www.EasternYachts.com

Cayenne is a 44ft Long keel classic designed by Robert Clark and built by James Miller in 1938.  She was named Cayenne by her first owner - Dr. Pepper!  She is a Bermudan cutter with a total of ten sails. Construction is Mahogany on oak frames with steel reinforcing frames where necessary. She has been Cascover sheathed below the waterline. Mechanical propulsion is by Perkins 4.108.  

Approximate Dimensions

Length Overall  44ft 13.41m
Waterline Length  31ft 7ins 9.63m
Beam  10ft 3.05m
Draft  7ft 2.13m
Thames Measurement  15 tons

She offers accommodation for up to six and has standing headroom throughout. 

In her current ownership she has sailed the equivalent of twice around the world.

 

[ Home ] Sails and Deck Gear ] Cockpit ] Layout ] Saloon ] Galley ] Nav Station ] Forecabin ] Heads ] Engine ] Specifications ] Comments ]
For further details or to arrange to view, please contact Adrian  Espin at: - Astonbury Marine Services 
19 Colne Road, Brightlingsea, Essex, CO7 0DL  Tel:  +44 (0) 1206 305 996
  
or email to: adrian@EasternYachts.com
In this case we are acting as Brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted.