Sails and Deck Gear
Rotostay headsail reefing gear (1985); forestay, bobstay, and rigging screw renewed 1995.
Main mast, inner forestay, shrouds, backstay and rigging screws renewed 1997. Main chainplates renewed 1994.
Mizzen standard stays renewed 1990, and rigging screws in 2001. Additional cap stays fitted in 1990 to give improved support in view of large radar scanner and wind generator mounted on mizzen mast.
Headsail and cruising chute sheets renewed 1991, main and mizzen sheets renewed 2000.
Cruising chute halyard renewed 1997, headsail, mainsail and mizzen halyards renewed 2001.
Headsail: 330 sq ft 30.7m2
Mainsail: 150 sq ft 14.1m2
Mizzen: 54 sq ft 5.0m2
Total sail area: 534 sq ft 49.8m2
|Roller reefing headsail (1985). New UV protection strips 1996.|
|Mainsail, mizzen, and sail covers new in 1991.|
|Cruising chute and snuffer new in 1982.|
|Storm jib (original).|
Note: all sails are in good condition.
35 lb CQR anchor with approximately 52 m of 5/16" calibrated chain; stows on bow roller or chocks on foredeck.
|Danforth pattern kedge anchor stowed on teak mount on pushpit.|
Deck and General Gear
|SL manual anchor windlass with chain gypsy and warping drum.|
|Mooring cleats: three on foredeck, two midships, two stern.|
|Comprehensive set of warps.|
|Assorted boathooks, including one with Maxi-Moor "Grab-it" hook for securing a warp to a ring.|
|Ensign staff and red ensign.|
|Folding day-shapes: anchor ball and motor sailing cone.|
|Teak outboard mount on pushpit.|
|Teak platform for securing inflatable above aft cabin.|
|Canvas bosun's chair plus a pair of Petzl "Hand Ascender" ratchet devices which allow access to the masthead by climbing a halyard safely without assistance.|