Sailing Boats | Cutters and Sloops | Schooners, Ketches and Yawls | Classic Yachts | Tall Ships | Motor Sailers | Classic Motor Cruisers | Motor Yachts | Sports Cruisers | Fishing Boats | Project Boats | Useful Links | Sell your Boat | Boats Wanted |

"Gularis", Staniland TSDY by Hyland and Comben

 
Home
Deck Gear
Wheelhouse
Cockpit
Saloon
Galley
Forecabin
Heads
Engines
Specifications
Comments

Specifications

Approximate Dimensions

Length on Deck  40ft 9ins 12.42m
Beam  10ft 3.05m
Draft  3ft 6ins 1.07m
Displacement  10 tons 10,160kg
Thames Measurement 15 tons

Deck Equipment

Timber spars
Sails x 2 - not used in current ownership, due for replacement

windlass.jpg (19794 bytes)

Original Hyland hydraulic windlass
27lb Plough anchor
~50m chain

Davits

bowroller.jpg (19953 bytes)

Beautiful chromed bronze deck fittings
Fenders
Warps

General Equipment

The compass and engine rev. counters look original

clockbaro.jpg (35902 bytes)

Clock and barometer

Refleks Diesel heater

Water heater

Engines: 

Twin BMC Commodore 4-cylinder diesels, understood to be 50hp

Tankage

Diesel 2 x 365 litres 
Water 250 litres

Electrics / Electronics

Standard horizon GPS Chart 150C 

midlandvhf.jpg (24886 bytes)

Midland Neptune DSC VHF Radio Telephone

Nasa Clipper Depth echo sounder

Nasa Clipper speedo /log
3 x 185Ah 12 Volt batteries
Navigation lights
230Volt shore power installation
3.25KVA electric start petrol 230V generator

Safety Gear

firstaid.jpg (32609 bytes)

first aid box

Gas detector
Smoke detector
Lifebelts
2 manual bilge pumps
electric bilge pump
Fire extinguishers x3
Emergency tiller can be fitted
 

Home ] Deck Gear ] Wheelhouse ] Cockpit ] Saloon ] Galley ] Forecabin ] Heads ] Engines ] [ Specifications ] Comments ]
Bookmark and Share
For further details or to arrange to view, please contact
Adrian  Espin at: - Astonbury Marine Services 
19 Colne Road, Brightlingsea, Essex, CO7 0DL  Tel: 01206 305 996  or +44 1206 305 996
  
or email to: adrian@EasternYachts.com
In this case we are acting as Brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted.