www.EasternYachts.com | New Cromarty Yachts | Sailing Boats | Cutters and Sloops | Schooners, Ketches and Yawls | Motor Sailers | Classic Yachts | Classic Motor Cruisers | Motor Yachts | Project Boats | Sell your Boat

"Tani", Itchen Ferry style Gaff Cutter Lying  Chichester

Sails and Deck Gear

  Site visits

Click here to tell

7,000 - Sold - More craft like this required!
For current listings click on HTTP://www.EasternYachts.com

 Enter your email address here to be kept up to date on all of our Classic Yachts: -
subscribe | unsubscribe It will not be shared with any other organisation

Tani is a Pitch Pine on Oak, Itchen Ferry style Gaff Cutter believed built in the 1920s. Decks are Pitch pine covered with 1/4 inch marine ply and then sheathed with GRP. Her sails by James Lawrence Sailmakers of Brightlingsea are all in good condition. She offers comfortable accommodation for two but could easily be modified to provide additional berths.   Mechanical propulsion is by single cylinder Sabb diesel.

Approximate Dimensions

Length on Deck  25ft 3ins 7.7m
Beam  8ft 9ins 2.67m
Draft  4ft 3ins 1.3m
Displacement  5 tons 5000kg

Winter comfort is provided by a coal stove, cooking is by spirit (meths) cooker.

Tani has recently undergone a major refit, with many items replaced, having been swamped after having been badly moored. 


[ Home ] Sails and Deck Gear ] Cockpit ] Saloon ] Galley ] Forecabin ] Engine ] Specifications ] Comments ]
For further details or to arrange to view, please contact Adrian  Espin at: - Astonbury Marine Services 
19 Colne Road, Brightlingsea, Essex, CO7 0DL  Tel: 01206 305 996 +44 1206 305 996
or email to: adrian@EasternYachts.com
In this case we are acting as Brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted.