www.EasternYachts.com | New Cromarty Yachts | Sailing Boats | Cutters and Sloops | Schooners, Ketches and Yawls | Motor Sailers | Classic Yachts | Classic Motor Cruisers | Motor Yachts | Project Boats | Sell your Boat

  "Tern"   Privateer 20 Sold

 
Home
Sails and Deck Gear
Cockpit
Saloon
Specifications
Comments

Specifications

Tern is a Privateer 20, GRP, centreboard, gaff cutter designed by Norman Howard and believed built by Small Craft (Blockley) in the mid 1970s.

Approximate Dimensions

Length Overall 
(Inc. Bowsprit)
23ft 7.01m
Length on Deck  19ft 7ins 5.97m
Waterline Length  16ft 5ins 5.00m
Beam  6ft 10ins 2.08m
Draft Keel up 1ft 2ins 0.36m
Draft keel down 4ft 6ins 1.37m
Displacement  1,250lb 570kg
Ballast 315lbs 143kg

Sails, Spars and Deck Equipment

Spruce spars (new 2001
Mainsail by North Sea Sails (2001)
Jib by North Sea Sails (2001)
Staysail by North Sea Sails (2001)
Roller furling on Jib
Slab reefing on mainsail
Total sail area approx 170 sq ft.
Stainless steel pulpit
Boat hook
Fenders
Warps
15lb plough anchor 4m chain 15m warp
light folding kedge.
Manual bilge pump

General Equipment

Single burner portable gas ring
Crockery
Cutlery
pans 

Engine: 

3.3hp Mercury outboard motor (new 2002) with integral fuel tank

Shore gear

Two wheel trailer (unbraked)
Winter cover
 

Click here for more: - Home ] Sails and Deck Gear ] Cockpit ] Saloon ] [ Specifications ] Comments ] 
    For further details or to arrange to view, please contact
Adrian  Espin at: - Astonbury Marine Services 
19 Colne Road, Brightlingsea, Essex, CO7 0DL  Tel: 01206 305 996 or +44  1206  305996
  
or email to: ame@EasternYachts.com
THESE SPECIFICATIONS ARE INTENDED AS ILLUSTRATION ONLY AND DO NOT FORM PART OF ANY CONTRACT
The particulars given above are believed to be correct but the Vendor does not make or give and neither the Broker nor any person in its employment has any authority to make or give any representation or warranty in relation to this vessel in respect of which any Purchaser must rely on his own inspection.