New Cromarty Yachts | Sailing Boats | Cutters and Sloops | Schooners, Ketches and Yawls | Motor Sailers | Classic Yachts | Tall Ships | Classic Motor Cruisers | Motor Yachts | Project Boats | Sell your Boat

"Zenith", Deben 4 - Tonner  Lying  Suffolk

 
Home
Sails and Deck Gear
Cockpit
Saloon
Forecabin
Engine
Specifications
Comments
Survey

  Site visits 
Click here to tell

£7,750 Sold - More craft like this required!
For current listings click on HTTP://www.EasternYachts.com

Zenith is a very pretty gaff cutter, designed by William Maxwell Blake and believed built by Whisstocks of Woodbridge, Suffolk in 1936.  Her construction is of Pitch Pine on Oak frames. She has recently had her transom, decks, coachroof, cockpit and main cabin furniture completely rebuilt and a reconditioned Yanmar 1GM diesel installed. Her Keelbolts were checked and replaced.  She offers 2 berths and has a small galley.

Approximate Dimensions

Length Overall inc. bowsprit  25ft 9ins 7.85m
Length on Deck  22ft 3ins 6.78m
Waterline Length  19ft 9ins 6.02m
Beam  7ft 3ins 2.21m
Draft  3ft 9ins 1.14m

 Enter your email address here to be kept up to date on our Classic Yachts: -
subscribe | unsubscribe It will not be shared with any other organisation
 

[ Home ] [ Sails and Deck Gear ] [ Cockpit ] [ Saloon ] [ Forecabin ] [ Engine ] [ Specifications ] [ Comments ] [ Survey ]
For further details or to arrange to view, please contact Adrian  Espin at: - Astonbury Marine Services 
19 Colne Road, Brightlingsea, Essex, CO7 0DL  Tel: 01206 305 996 or +44 1206 305 996   
or email to: adrian@EasternYachts.com
 In this case we are acting as Brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted.